[過去ﾛｸﾞ]
１９７０年代 ボクシング総合スレ ７4R (1002ﾚｽ)
１９７０年代 ボクシング総合スレ ７4R http://medaka.5ch.net/test/read.cgi/boxing/1729165272/
上
下
前
次
1-
新
通常表示
512ﾊﾞｲﾄ分割
ﾚｽ栞
このｽﾚｯﾄﾞは過去ﾛｸﾞ倉庫に格納されています｡
次ｽﾚ検索
歴削→次ｽﾚ
栞削→次ｽﾚ
過去ﾛｸﾞﾒﾆｭｰ
1: 名無しさん名無しさん＠腹打て腹。 [] 2024/10/17(木) 20:41:12.29 ID:8cnB2rH3 よろしくお願いいたします。 http://medaka.5ch.net/test/read.cgi/boxing/1729165272/1
983: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:11:08.66 ID:vHOq54iQ Input signal Input meters Captured/SC Captured Threshold curve Reduced signal Curve node and widget Adjustable crossover Band Cut control Trash the threshold curve Enable sidechain mode/SC listen Sensitivity: knee and ratio of dynamic reduction Shape: select threshold curve and adjust curve mix Main knob: adjust overall threshold Tilt: adjust LF/HF focus of the threshold curve Wet/Dry mix; lock protects mix when preset loads Output section/limiter/makeup gain Advanced controls show/hide Attack time of reduction Release time of reduction Precision: depth and width of processing Adjust tilt anchor frequency Curve Smooth: softens the threshold curve Balance: L/R, M/S, linked Delta: listen to reduced signal only Hide/Show crossovers Interface and Controls WaveSystem Toolbar: presets, A/B settings, and http://medaka.5ch.net/test/read.cgi/boxing/1729165272/983
984: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:11:27.83 ID:vHOq54iQ Steps in the Process Threshold curve: Equator uses a threshold curve to determine what parts of the signal will be processed. The threshold curve can be captured from a clip of the sound or shaped from a flat file. In both cases you can use the sidechain signal (SC Captured) as well as the main signal. Which method you use depends on production needs, the nature of the input signal, and personal preferences. Set Threshold: Use the Main knob to set an overall threshold, then adjust Shape and Tilt to broadly affect the curve to your liking. Then you can accurately tailor the curve by adding graph nodes. By locally editing the curve, you can control what is being processed and what isn’t with great accuracy. Processing Controls: Move the crossovers to define the frequency ranges used for precise band-cut control. This provides very local processing control. Fine tune the reduction processing by using advanced controls such as nodes, attack/release, precision, and curve smoothing, as needed. Adjust stereo imaging, auto makeup gain, and limiter as needed to further customize the sound. Save/Load Presets: Save your settings as presets, or load factory presets and threshold curves for different audio content. The preset system allows you to load parts of presets, which saves time and improves workflow and speed. IMPORTANT Equator has a dynamic makeup gain module that can boost some frequencies due to reductions in others. With very high input levels or heavily compressed/limited signals with no headroom, this might cause saturation or distortion. While auto makeup gain keeps the input and output energy levels similar, it may also color the output, altering the frequency balance. For optimal results, provide a few dBs of headroom on your input, and avoid using makeup gain if your audio is excessively compressed or limited. http://medaka.5ch.net/test/read.cgi/boxing/1729165272/984
985: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:11:28.62 ID:vHOq54iQ Steps in the Process Threshold curve: Equator uses a threshold curve to determine what parts of the signal will be processed. The threshold curve can be captured from a clip of the sound or shaped from a flat file. In both cases you can use the sidechain signal (SC Captured) as well as the main signal. Which method you use depends on production needs, the nature of the input signal, and personal preferences. Set Threshold: Use the Main knob to set an overall threshold, then adjust Shape and Tilt to broadly affect the curve to your liking. Then you can accurately tailor the curve by adding graph nodes. By locally editing the curve, you can control what is being processed and what isn’t with great accuracy. Processing Controls: Move the crossovers to define the frequency ranges used for precise band-cut control. This provides very local processing control. Fine tune the reduction processing by using advanced controls such as nodes, attack/release, precision, and curve smoothing, as needed. Adjust stereo imaging, auto makeup gain, and limiter as needed to further customize the sound. Save/Load Presets: Save your settings as presets, or load factory presets and threshold curves for different audio content. The preset system allows you to load parts of presets, which saves time and improves workflow and speed. IMPORTANT Equator has a dynamic makeup gain module that can boost some frequencies due to reductions in others. With very high input levels or heavily compressed/limited signals with no headroom, this might cause saturation or distortion. While auto makeup gain keeps the input and output energy levels similar, it may also color the output, altering the frequency balance. For optimal results, provide a few dBs of headroom on your input, and avoid using makeup gain if your audio is excessively compressed or limited. http://medaka.5ch.net/test/read.cgi/boxing/1729165272/985
986: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:11:29.22 ID:vHOq54iQ Steps in the Process Threshold curve: Equator uses a threshold curve to determine what parts of the signal will be processed. The threshold curve can be captured from a clip of the sound or shaped from a flat file. In both cases you can use the sidechain signal (SC Captured) as well as the main signal. Which method you use depends on production needs, the nature of the input signal, and personal preferences. Set Threshold: Use the Main knob to set an overall threshold, then adjust Shape and Tilt to broadly affect the curve to your liking. Then you can accurately tailor the curve by adding graph nodes. By locally editing the curve, you can control what is being processed and what isn’t with great accuracy. Processing Controls: Move the crossovers to define the frequency ranges used for precise band-cut control. This provides very local processing control. Fine tune the reduction processing by using advanced controls such as nodes, attack/release, precision, and curve smoothing, as needed. Adjust stereo imaging, auto makeup gain, and limiter as needed to further customize the sound. Save/Load Presets: Save your settings as presets, or load factory presets and threshold curves for different audio content. The preset system allows you to load parts of presets, which saves time and improves workflow and speed. IMPORTANT Equator has a dynamic makeup gain module that can boost some frequencies due to reductions in others. With very high input levels or heavily compressed/limited signals with no headroom, this might cause saturation or distortion. While auto makeup gain keeps the input and output energy levels similar, it may also color the output, altering the frequency balance. For optimal results, provide a few dBs of headroom on your input, and avoid using makeup gain if your audio is excessively compressed or limited. http://medaka.5ch.net/test/read.cgi/boxing/1729165272/986
987: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:11:50.21 ID:vHOq54iQ Threshold Curve: Establish What Will Be Processed The threshold curve is just that: a curve that is adjusted (lowered) to determine which frequencies will be “shaved off” by it and will therefore be processed. Frequencies that are below the threshold are largely unprocessed. The threshold value is globally controlled by the Main knob. There are two ways to make a threshold curve. • Start with a flat curve. • Create a curve derived from the input signal. Start With a Flat Threshold Curve Use this mode when you want to sculpt, rather than polish, your sound. If you feel that your audio needs corrective EQ or it requires processing to make it more balanced or to “pop-out” of the mix, then start by using the default flat threshold curve and then craft it as needed. This technique does not require an initial capture of the input signal. There are three ways to open a flat curve: Click the Trash button on the upper-right side of the graph. This flushes the captured threshold curve, if any, and loads a flat curve instead. It also clears all nodes that were set on the curve. Go to the Shape control and select Flat. Turn the Shape value to 100. If you prefer, you can start with a factory curve from the drop-down menu. Open the Presets menu on the WaveSystem Toolbar (circled yellow here) and select Full Reset/All to clear the curves and settings. Other reset options are available in the menu. http://medaka.5ch.net/test/read.cgi/boxing/1729165272/987
988: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:11:51.06 ID:vHOq54iQ Threshold Curve: Establish What Will Be Processed The threshold curve is just that: a curve that is adjusted (lowered) to determine which frequencies will be “shaved off” by it and will therefore be processed. Frequencies that are below the threshold are largely unprocessed. The threshold value is globally controlled by the Main knob. There are two ways to make a threshold curve. • Start with a flat curve. • Create a curve derived from the input signal. Start With a Flat Threshold Curve Use this mode when you want to sculpt, rather than polish, your sound. If you feel that your audio needs corrective EQ or it requires processing to make it more balanced or to “pop-out” of the mix, then start by using the default flat threshold curve and then craft it as needed. This technique does not require an initial capture of the input signal. There are three ways to open a flat curve: Click the Trash button on the upper-right side of the graph. This flushes the captured threshold curve, if any, and loads a flat curve instead. It also clears all nodes that were set on the curve. Go to the Shape control and select Flat. Turn the Shape value to 100. If you prefer, you can start with a factory curve from the drop-down menu. Open the Presets menu on the WaveSystem Toolbar (circled yellow here) and select Full Reset/All to clear the curves and settings. Other reset options are available in the menu. http://medaka.5ch.net/test/read.cgi/boxing/1729165272/988
989: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:11:51.85 ID:vHOq54iQ Threshold Curve: Establish What Will Be Processed The threshold curve is just that: a curve that is adjusted (lowered) to determine which frequencies will be “shaved off” by it and will therefore be processed. Frequencies that are below the threshold are largely unprocessed. The threshold value is globally controlled by the Main knob. There are two ways to make a threshold curve. • Start with a flat curve. • Create a curve derived from the input signal. Start With a Flat Threshold Curve Use this mode when you want to sculpt, rather than polish, your sound. If you feel that your audio needs corrective EQ or it requires processing to make it more balanced or to “pop-out” of the mix, then start by using the default flat threshold curve and then craft it as needed. This technique does not require an initial capture of the input signal. There are three ways to open a flat curve: Click the Trash button on the upper-right side of the graph. This flushes the captured threshold curve, if any, and loads a flat curve instead. It also clears all nodes that were set on the curve. Go to the Shape control and select Flat. Turn the Shape value to 100. If you prefer, you can start with a factory curve from the drop-down menu. Open the Presets menu on the WaveSystem Toolbar (circled yellow here) and select Full Reset/All to clear the curves and settings. Other reset options are available in the menu. http://medaka.5ch.net/test/read.cgi/boxing/1729165272/989
990: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:12:12.72 ID:vHOq54iQ No matter how you open the initial flat curve, you can shape and modify it using several tools. The Main knob sets the overall threshold (Main Plate panel). Curve nodes are handles that let you change the shape of the threshold (FFT Analyzer). Shape morphs the underlying shape of the threshold (Main Plate panel). http://medaka.5ch.net/test/read.cgi/boxing/1729165272/990
991: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:12:13.47 ID:vHOq54iQ No matter how you open the initial flat curve, you can shape and modify it using several tools. The Main knob sets the overall threshold (Main Plate panel). Curve nodes are handles that let you change the shape of the threshold (FFT Analyzer). Shape morphs the underlying shape of the threshold (Main Plate panel). http://medaka.5ch.net/test/read.cgi/boxing/1729165272/991
992: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:12:14.39 ID:vHOq54iQ No matter how you open the initial flat curve, you can shape and modify it using several tools. The Main knob sets the overall threshold (Main Plate panel). Curve nodes are handles that let you change the shape of the threshold (FFT Analyzer). Shape morphs the underlying shape of the threshold (Main Plate panel). http://medaka.5ch.net/test/read.cgi/boxing/1729165272/992
993: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:12:40.76 ID:vHOq54iQ Input signal Input meters Captured/SC Captured Threshold curve Reduced signal Curve node and widget Adjustable crossover Band Cut control Trash the threshold curve Enable sidechain mode/SC listen Sensitivity: knee and ratio of dynamic reduction Shape: select threshold curve and adjust curve mix Main knob: adjust overall threshold Tilt: adjust LF/HF focus of the threshold curve Wet/Dry mix; lock protects mix when preset loads Output section/limiter/makeup gain Advanced controls show/hide Attack time of reduction Release time of reduction Precision: depth and width of processing Adjust tilt anchor frequency Curve Smooth: softens the threshold curve Balance: L/R, M/S, linked Delta: listen to reduced signal only Hide/Show crossovers Interface and Controls WaveSystem Toolbar: presets, A/B settings, and http://medaka.5ch.net/test/read.cgi/boxing/1729165272/993
994: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:12:41.82 ID:vHOq54iQ Input signal Input meters Captured/SC Captured Threshold curve Reduced signal Curve node and widget Adjustable crossover Band Cut control Trash the threshold curve Enable sidechain mode/SC listen Sensitivity: knee and ratio of dynamic reduction Shape: select threshold curve and adjust curve mix Main knob: adjust overall threshold Tilt: adjust LF/HF focus of the threshold curve Wet/Dry mix; lock protects mix when preset loads Output section/limiter/makeup gain Advanced controls show/hide Attack time of reduction Release time of reduction Precision: depth and width of processing Adjust tilt anchor frequency Curve Smooth: softens the threshold curve Balance: L/R, M/S, linked Delta: listen to reduced signal only Hide/Show crossovers Interface and Controls WaveSystem Toolbar: presets, A/B settings, and http://medaka.5ch.net/test/read.cgi/boxing/1729165272/994
995: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:12:42.39 ID:vHOq54iQ Input signal Input meters Captured/SC Captured Threshold curve Reduced signal Curve node and widget Adjustable crossover Band Cut control Trash the threshold curve Enable sidechain mode/SC listen Sensitivity: knee and ratio of dynamic reduction Shape: select threshold curve and adjust curve mix Main knob: adjust overall threshold Tilt: adjust LF/HF focus of the threshold curve Wet/Dry mix; lock protects mix when preset loads Output section/limiter/makeup gain Advanced controls show/hide Attack time of reduction Release time of reduction Precision: depth and width of processing Adjust tilt anchor frequency Curve Smooth: softens the threshold curve Balance: L/R, M/S, linked Delta: listen to reduced signal only Hide/Show crossovers Interface and Controls WaveSystem Toolbar: presets, A/B settings, and http://medaka.5ch.net/test/read.cgi/boxing/1729165272/995
996: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:12:58.75 ID:vHOq54iQ Sidechain Capture Whether you are using a captured curve or shaping a flat curve, you can use a sidechain from another DAW track to attenuate the audio on the input curve track. The sidechain’s curve is flipped, removing similar frequencies between competing sources to “carve” space in the mix. This creates more space in the mix, generally without adverse effects. To use the sidechain for analysis, you must first route audio to the sidechain in your DAW and click the SC button on the plugin. Consult your DAW’s user guide. SIDECHAIN PANEL CONTROLS SC On/Off Activates the SC section. SC Listen Click and hold the button to audition the signal that the plugin is receiving from the SC buss. SC Audition requires the SC Capture button to be on, and that audio is routed to the SC buss. Rider On/Off Toggles between two types of SC level-control behavior. • Rider On: The general reduction amount is triggered by the incoming SC level. • Rider Off: Threshold curve sets the reduction amount, regardless of the incoming SC level. Capture SC When the SC capture mode is on, the Capture button becomes the Capture SC button. Click to start a SC capture. EXAMPLE: CARVE SPACE FOR A LEAD VOCAL • Send the lead vocal to a sidechain (SC) in your DAW. • Load Equator on any other track, group, or Aux you want to process (e.g., guitar, piano, drum group, background vocals). • Select Capture SC and play to capture a flipped threshold based on the lead vocal track. • Use the Main knob to lower the threshold and reduce frequencies that clash with the lead vocal. Because of the flipped curve, you will be processing only energy-rich areas that clash with the lead vocals. By doing this, you needn’t boost the lead vocal to make it cut through the mix; instead, you’ll achieve the same effect by taming clashing frequencies from other tracks. This will also clear up your mix http://medaka.5ch.net/test/read.cgi/boxing/1729165272/996
997: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:12:59.80 ID:vHOq54iQ Sidechain Capture Whether you are using a captured curve or shaping a flat curve, you can use a sidechain from another DAW track to attenuate the audio on the input curve track. The sidechain’s curve is flipped, removing similar frequencies between competing sources to “carve” space in the mix. This creates more space in the mix, generally without adverse effects. To use the sidechain for analysis, you must first route audio to the sidechain in your DAW and click the SC button on the plugin. Consult your DAW’s user guide. SIDECHAIN PANEL CONTROLS SC On/Off Activates the SC section. SC Listen Click and hold the button to audition the signal that the plugin is receiving from the SC buss. SC Audition requires the SC Capture button to be on, and that audio is routed to the SC buss. Rider On/Off Toggles between two types of SC level-control behavior. • Rider On: The general reduction amount is triggered by the incoming SC level. • Rider Off: Threshold curve sets the reduction amount, regardless of the incoming SC level. Capture SC When the SC capture mode is on, the Capture button becomes the Capture SC button. Click to start a SC capture. EXAMPLE: CARVE SPACE FOR A LEAD VOCAL • Send the lead vocal to a sidechain (SC) in your DAW. • Load Equator on any other track, group, or Aux you want to process (e.g., guitar, piano, drum group, background vocals). • Select Capture SC and play to capture a flipped threshold based on the lead vocal track. • Use the Main knob to lower the threshold and reduce frequencies that clash with the lead vocal. Because of the flipped curve, you will be processing only energy-rich areas that clash with the lead vocals. By doing this, you needn’t boost the lead vocal to make it cut through the mix; instead, you’ll achieve the same effect by taming clashing frequencies from other tracks. This will also clear up your mix http://medaka.5ch.net/test/read.cgi/boxing/1729165272/997
998: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:13:00.41 ID:vHOq54iQ Sidechain Capture Whether you are using a captured curve or shaping a flat curve, you can use a sidechain from another DAW track to attenuate the audio on the input curve track. The sidechain’s curve is flipped, removing similar frequencies between competing sources to “carve” space in the mix. This creates more space in the mix, generally without adverse effects. To use the sidechain for analysis, you must first route audio to the sidechain in your DAW and click the SC button on the plugin. Consult your DAW’s user guide. SIDECHAIN PANEL CONTROLS SC On/Off Activates the SC section. SC Listen Click and hold the button to audition the signal that the plugin is receiving from the SC buss. SC Audition requires the SC Capture button to be on, and that audio is routed to the SC buss. Rider On/Off Toggles between two types of SC level-control behavior. • Rider On: The general reduction amount is triggered by the incoming SC level. • Rider Off: Threshold curve sets the reduction amount, regardless of the incoming SC level. Capture SC When the SC capture mode is on, the Capture button becomes the Capture SC button. Click to start a SC capture. EXAMPLE: CARVE SPACE FOR A LEAD VOCAL • Send the lead vocal to a sidechain (SC) in your DAW. • Load Equator on any other track, group, or Aux you want to process (e.g., guitar, piano, drum group, background vocals). • Select Capture SC and play to capture a flipped threshold based on the lead vocal track. • Use the Main knob to lower the threshold and reduce frequencies that clash with the lead vocal. Because of the flipped curve, you will be processing only energy-rich areas that clash with the lead vocals. By doing this, you needn’t boost the lead vocal to make it cut through the mix; instead, you’ll achieve the same effect by taming clashing frequencies from other tracks. This will also clear up your mix http://medaka.5ch.net/test/read.cgi/boxing/1729165272/998
999: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:13:31.35 ID:vHOq54iQ FFT Analyzer Area Displays the input FFT, allowing you to visualize where reduction is performed and required. Capture, view, and adjust the threshold curve (Equator Line) and control processing using the crossovers and nodes. Main Plate Panel Adjust the primary processing parameters, such as Threshold, Delta, Tilt, and Shape. These controls allow you to fully control the intensity, balance, and spectral properties of the processing. Advanced Panel Provides fine control over how Equator processes the audio, including attack/release, precision, tilt frequency, and curve smoothing. This allows detailed adjustments for specific needs. Stereo Controls Configure how the plugin processes stereo signals with options for linked, split, or mid/side processing. Adjust the balance to manage the processing percentage between left and right channels or mid and sides. Capture Screen Click the Capture icon to start the capture. When the Threshold curve has stabilized, the capture is complete. Presets Management Use the WaveSystem Toolbar to save and load presets or threshold curves for different audio content. Quickly apply previously saved settings or factory presets to streamline your workflow. The preset system allows partial loading of presets, so you don’t have to re-capture your content. This saves time and improves workflow. http://medaka.5ch.net/test/read.cgi/boxing/1729165272/999
1000: 名無しさん名無しさん＠腹打て腹。 [sage] 2024/12/28(土) 19:13:31.87 ID:vHOq54iQ FFT Analyzer Area Displays the input FFT, allowing you to visualize where reduction is performed and required. Capture, view, and adjust the threshold curve (Equator Line) and control processing using the crossovers and nodes. Main Plate Panel Adjust the primary processing parameters, such as Threshold, Delta, Tilt, and Shape. These controls allow you to fully control the intensity, balance, and spectral properties of the processing. Advanced Panel Provides fine control over how Equator processes the audio, including attack/release, precision, tilt frequency, and curve smoothing. This allows detailed adjustments for specific needs. Stereo Controls Configure how the plugin processes stereo signals with options for linked, split, or mid/side processing. Adjust the balance to manage the processing percentage between left and right channels or mid and sides. Capture Screen Click the Capture icon to start the capture. When the Threshold curve has stabilized, the capture is complete. Presets Management Use the WaveSystem Toolbar to save and load presets or threshold curves for different audio content. Quickly apply previously saved settings or factory presets to streamline your workflow. The preset system allows partial loading of presets, so you don’t have to re-capture your content. This saves time and improves workflow. http://medaka.5ch.net/test/read.cgi/boxing/1729165272/1000
1001: 1001 [] ID:Thread このスレッドは１０００を超えました。 新しいスレッドを立ててください。 life time: 71日 22時間 32分 20秒 http://medaka.5ch.net/test/read.cgi/boxing/1729165272/1001
1002: 1002 [] ID:Thread 5ちゃんねるの運営はUPLIFT会員の皆さまに支えられています。 運営にご協力お願いいたします。 ─────────────────── 《UPLIFT会員の主な特典》 ★ 5ちゃんねる専用ブラウザからの広告除去 ★ 5ちゃんねるの過去ログを取得 ★ 書き込み規制の緩和 ─────────────────── 会員登録には個人情報は一切必要ありません。 4 USD/mon. から匿名でご購入いただけます。 ▼ UPLIFT会員登録はこちら ▼ https://uplift.5ch.net/ ▼ UPLIFTログインはこちら ▼ https://uplift.5ch.net/login http://medaka.5ch.net/test/read.cgi/boxing/1729165272/1002
上
下
前
次
1-
新
書
関
写
板
覧
索
設
栞
歴
ｽﾚ情報
赤ﾚｽ抽出
画像ﾚｽ抽出
歴の未読ｽﾚ
AAｻﾑﾈｲﾙ
Google検索
Wikipedia
ぬこの手
ぬこTOP
0.011s